Underwriters Laboratories DS-2CD2232-I5 Manuel d'utilisateur télécharger pdf (Page 38)

User Manual of Network Camera

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:

TCP/IP settings must be properly configured before you operate the camera over

network. The camera supports both the IPv4 and IPv6. Both versions may be

configured simultaneously without conflicting to each other, and at least one IP

version should be configured.

Steps:

1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP

Or Configuration > Advanced Configuration > Network > TCP/IP

Figure 6-6 TCP/IP Settings

2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address,

IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and

Multicast Address.

Notes:

 The valid value range of MTU is 500 ~ 1500.

 The Multicast sends a stream to the multicast group address and allows multiple

clients to acquire the stream at the same time by requesting a copy from the

multicast group address. Before utilizing this function, you have to enable the

Multicast function of your router.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 94 95

Pas de commentaire

Underwriters Laboratories DS-2CD2232-I5 Manuel d'utilisateur Page 38